------------------------------------------------------ * Release 2.00.8.1pre6-i.wfb 22/01/2004 - WORLDWIDE Version ______________________________________________________ ***** Silent update 23/01/04 - 04:33 Am Paris ****** Fixed problem VPN server conflict with PPPoE / PPTPd Fixed problem with Local DNS Fixed problem with Autorun Bash Shell Script (ABSS) Fixed problem when Save Setting in Administration Added support for DYNDNS Custom Fixed bug display DHCP Static list Fixed PPTP Server with iptables mistake rule (Must use this version for 100% PPTP Works) Added for accept Remote Wake On Lan Fixed problem Enable / Disable Telnetd Fixed ISP with PPTP Client broken (must try release 4) Fixed Wake On Lan not set right status Allowed more DHCP Static record Fixed ISP with PPPoE Client broken in version 3 - 4 need feeback for release pre 5 // New in pre 6 // Added for autorun BASH Shell Script (BSS) - See in Administration / Diagnostics and it's NOT recommend for beginner users Added for support 255.255.0.0 and 255.0.0.0 Lan NetMask Auto add Router IP to Static Dhcp if DHCP Static is enable Thanks for all feeback ------------------------------------------------------ * Release 2.00.8.1h.wfb 15/01/2004 - WORLDWIDE Version ______________________________________________________ Fixed some problem with PPTP and PPPoE (RECOMMEND UPDATE) Fixed problem multi PPTP Passthourgh Fixed bug display password (begin by number) not correct in VPN Server Fixed problem compatible with WRT54G version 2 Set dynamic Firewall for PPPTP (with ip-up - ip-down) ******** NEED RESET TO Factory Defaults AFTER UPGRADED ************** ------------------------------------------------------ * Release 2.00.8.1g.wfb 11/01/2004 - WORLDWIDE Version ______________________________________________________ Now, full PPPTP Service support - Multi connect (up to 1024 but max can be 5 because RAM limit) - Support for WAN connect to Local PC behide WRT54G VPN - For view workgroup or view share resource, please use IP address: EX: Open My Computer, type \\ - Support for VPN to WAN, using like a router VPN Don't need uncheck "Use default gateway" option in Properties->Networking->TCP/IP->Advanced Recommend for using as VPN router for safely data protect for wire and wireless mode - Full Compress and Crypto mode, now faster and better with full M.S 64/128 Bits Crypto - Full support for Windows 9x/2K/XP and Linux with PPTP Client Optimized memory use and source code Fixed problem with VNP Server option Local Only (Error 619) Fixed problem with PPTP Client for someone using PPTP ADSL Service (** need test **) Added DNS in DHCP Static page for easy resolver local Dynamic Name System: Ex: set DNS -> local.int set DHCP Static -> 10.0.0.1 00:11:22:33:44:55 zeus-vu or DHCP Dynamic 10.0.0.10 assigned to PC with machine name zeus-banias now, try release and renew your DHCP, You can ping or test nslookup with DNS zeus-vu.local.int or zeus-banias.local.int * I'll put all source codes to Sourceforge, waitting for reply of SF's staff - Name project: wifi-box, if you're interest, join with us.... ------------------------------------------------------ * Release 2.00.8.1f.wfb 11/01/2004 - WORLDWIDE Version ______________________________________________________ ** Release F date 11/01/04 quick fix for pptp passthourgh problem ** Added for VPN Server (PPTP) Support See in Applications & Gaming / VPN Server Set: * Enable -> Enable and Listen on WAN & LAN Local Only -> Enable and Listen on LAN Disable -> Turn off service * Host IP -> Set Ip for Server IP, maybe use single (10.0.0.10) or IP range (10.0.0.10-20) but NOT SAME with Router IP or Overlap with DHCP Range * Client IP -> Set Ip for Client IP, maybe use single (192.168.0.50) or IP range (192.168.0.50-70) NOT SAME with Computer IP or Overlap with DHCP Range * Login -> Use for add client Username & Password, "Username" [Space] * [Space] "Password" [Espace] * [Enter] ex: "Tintin" [Espace] * [Espace] "My pass is long" [Espace] * [Enter] "Anges" [Espace] * [Espace] "Bonjour mon amour" [Espace] * [Enter] * Note: Need "" for Username and Password Fixed break route command Optimized for TCP/IP Added more Server Profiles (Ident and MSN), Port Forward (14) Added Reboot Router / Service button (Administration) for soft reboot router OR manual reboot all Service Added for Static DHCP option (thanks for Wumpus and Sveasoft forum for this patch) in : Setup / Static DHCP Static DHCP is used to allow DHCP server to assign same IP address to specific MAC address For add a static IP: in Setup / Static DHCP / Static data, type: IP [Space] MAC [Space] HOSTNAME [Enter] ex: 10.0.0.1 00:11:22:33:44:55 zeus-vu [Enter] 10.0.0.2 12:34:56:78:90:12 zeus-evo [Enter] Added for SNMPd ( ** EXPERIMENTAL **) in : Setup / SNMP ******** NEED RESET TO Factory Defaults AFTER UPGRADED ************** * Release 2.00.8.1e.wfb 3/1/2004 ________________________________ Updated Busybox to latest version 1.0pre5 Added support for Worldwide channels ( 1 to 14 * need driver and client tools support for channel 14 *) Corrected problem Cron try to sendmail for any cron job (set to /dev/null) Corrected problem with ping and traceroute web display (Linksys hardcore modified Busybox) For run shell command, type simply | before all command ( ex. | wl -i eth2 txpwr ) Fixed problem with FTP Passive mode Corrected Uptime display bug in Webpage Optimized ZoneEdit status code Optimized codes & firmware size * Release 2.00.8.1d.wfb 1/1/2004 ________________________________ Added for ZoneEdit.com Support (EXPERIMENTAL) Bug fixed for Server Profiles - Need reset to default (by Web interface for Server Profiles works correct - Make sure back up all information of your router - Ip / Password default is 192.168.1.1 / admin Optimized codes & firmware size * Release 2.00.8.1c.wfb 31/12/2003 ________________________________ Added Server Profiles for easy set port forward - now you can forward up to 20 templates Support for Multi PPTP / IPSec Passthourgh in and out thourgh Server Profiles Added Status page with uptime and CPU load info Optimized codes & firmware size * Release 2.00.8.1b.wfb 26/12/2003 ________________________________ Fixed for PPTP Passthourgh problem * Release 2.00.8.1.wfb 24/12/2003 ________________________________ First release with 2.00.8 source code. Added Bug to Ping, Tracroute in Web interface for allow to run a shell command Change size of dialog box Ping Web interface with maxlengh = 127 Option 1 times for Ping Upgrade Busybox to version 1.0 pre4 (/bin/busybox.new) Currently defined functions: [, addgroup, adduser, busybox, cat, chmod, chroot, clear, cp, date, echo, egrep, env, expr, false, fgrep, free, getty, grep, hexdump, hostname, ifconfig, kill, killall, klogd, ln, login, logread, ls, lsmod, makedevs, mesg, mkdir, modprobe, more, msh, mv, nc, netstat, nslookup, passwd, ping, ps, pwd, reboot, reset, rm, rmdir, rmmod, route, sh, sleep, strings, stty, sync, syslogd, tail, telnet, telnetd, test, top, touch, traceroute, true, tty, uptime, vi, wget, yes Because have some problem with insmod in version 1.0 pre4, I keep insmod build-in busybox 0.6 (/bin/busybox) Added Telnetd with password protection (login with root and your router password) Possible turn on/off Telnetd service (Under Administration->Management) Auto block telnet access form WAN (outside) to LAN (inside local network) Added Possible view / Change Power ajust and Antenna select to Web Interface Under Wireless-> Advanced Wireless Settings Added Support PPTP Local Server, auto make firewall rule for TCP 1723 and Protocol GER (47) Passthourght - Support Multi Passthourght Under Security -> VPN - Set to IP address 0 to disable this function Set default boot_wait=on Any feeback, sugestion: h.vu@wifi-box.net If you using my firmware and can help to make a small howto, please contact me. Thanks * Joyeux Noël et Bonne Année * Gia'ng Sinh Vui Ve? va` Na(m Mo*'i May Ma('n * Merry Christmas and Happy New Year /* Bug in this version */ 1. Can't turn off Wireless in http:///Wireless_Basic.asp. 2. Someone reported that Dyndns is break in this version, but not test yet.